(line 0) or the VTY lines (line 0 to 15). Spaces, and must be the last option specified in the username command.Įnters line configuration mode, and configures the console port Password must be from 1 to 25 characters, can contain embedded Enter 7 to specify that a hiddenįor password, specify the password the user must Level 1 givesįor encryption-type, enter 0 to specify that an Level 15 gives privileged EXEC mode access. Privilege level the user has after gaining access. Spaces and quotation marks are not allowed.Ĭan configure a maximum of 12000 clients each, for both username Sets the username, privilege level, and password for eachįor name, specify the user ID as one word or the Example: Switch(config)# username adamsample privilege 1 password secret456 Switch(config)# username 111111111111 mac attribute Sets a Telnet password for the line or lines. Password password Example: Switch(config-line)# password abcxyz543 There are 16 possible sessions on a command-capableĪre configuring all 16 possible Telnet sessions. Line vty 0 15 Example: Switch(config)# line vty 0 15Ĭonfigures the number of Telnet sessions (lines), and enters If a password is required for access to privileged EXEC mode, Not part of the file system and is not accessible by any user. This setting is saved in an area of the flash memory that isĪccessible by the boot loader and the Cisco IOS image, but it is No service password-recovery Example: Switch(config)# no service password-recovery (Optional) Encrypts the password when the password is defined orĮncryption prevents the password from being readable in the Service password-encryption Example: Switch(config)# service password-encryption Recover a lost encrypted password by any method. Password, you can not re-enter privileged EXEC mode. If you specify an encryption type and then enter a clear text Password-an encrypted password that you copy from another switch Specify an encryption type, you must provide an encrypted (Optional) For encryption-type, only typeĥ, a Cisco proprietary encryption algorithm, is available. Level is 15 (privileged EXEC mode privileges).Ĭase sensitive, and allows spaces but ignores leading spaces. Level 1 is normal user EXEC mode privileges. (Optional) For level, the range is from 0
0 Comments
Leave a Reply. |